Startup_stm32f303xc.s – assembler file from tool-chain, that creates the C runtime environment (stack and heap), initialises the processor, defines and setups interrupt vector table, and jumps to main().
These files are required to build a project in the IAR tool-chain and are part of CMSIS and SPL. When you use a device programmer then select JTAG option:ĭo not forget to add tool-chain files to your project.
#Iar 8051 license key Pc#
When your board is connected to the PC via USB-cable select SWD option. On the Debugger->Download page, select the “Flash Loader” option: On the Debugger option page, make appropriate settings for the debugger you are using (ST-LINK): The CMSIS and SPL libraries provide some abstracted functions for MCU setup, input/output, system startup code, and peripheral setup functions. Below you can see #defines for the CC2511 chip. The list of variables can be found in this EW-guide. It is possible to use IDE variables, for example $PROJ_DIR$ or $EW_DIR$. Whether your project uses the Standard Peripheral Library (SPL) then you should add this “#define”: USE_STDPERIPH_DRIVER Usually to setup your project properly you will need to configure include-paths to MCU and SPL header files. Most likely it is already installed in the IDE and is available in default “Include-paths”.
#Iar 8051 license key software#
It is recommended to include the library named: “Cortex® Microcontroller Software Interface Standard (CMSIS)”. To do this, click the “Device” button and choose the correct device for you project from the list (click button with “+” sign).įor Texas Instruments CC2511 device the configuration dialog looks like this: Next step is to configure the project properties for your MCU (board) STM32F3Discovery (stm32f303xx).
You will get a new project that contains empty main.c file. Now you can activate the product with the key and run the main window:Ĭlick the menu item “Create New Project”, select the language and MCU architecture (ARM, C/C ++ language) in the dialog window:
#Iar 8051 license key registration#
You will get a registration key by e-mail. When the installation is complete you need to register online (you can use any name and country, but you need valid e-mail). First of all you should download the installation package for: “IAR Embedded Workbench for ARM” from (size-limited evaluation license) It is really great that you have decided to develop firmware! You’ll be able to give a life to the wonderful world of hardware.
0 kommentar(er)
